Mewtwo

Pokemon chess set where Mewtwo chess piece was taken from here.
I have opted not to use the support provided by the file author but instead using the tree support generated by Cura as the tree support is easier to remove.
Mewtwo chess piece stl file
Mewtwo chess piece gcode

Inport of Mewtwo stl file into Cura

Settings used on Tevo Tarantula for Mewtwo Chess piece:

Layer Height: 0.1

Infill Density: 8%

Support Type: Tree

Build Plate Support: Brim

Print Time: Approximatly 3 hours

Failed Print of Mewtwo

This print failed as I have tried to print the figure with a slower print speed to avoid the use of support. However this generated a lot of strings and the failure to print certain parts of the model.

Final Print of Mewtwo

This print uses the tree support.